Canopy Calibration Settings

From WISPTech
Jump to: navigation, search

Contents

Step 1

Using this webpage, http://motorola.canopywireless.com/calibrate.php enter the MAC/ESN of the radio that you want to calibrate.

After submitting you will be sent an email that contains the settings for your radio.

Step 2

Pre version 8.x firmware

Go to http://<radio_ip>/mac.html and enter the relavant information.

Post version 8.x firmware

There is a tab under Configuration that you can enter the calibration information into. But it appears to only be in version 8.1.5 or higher firmware.